3.7V Lithium Polymer Battery Pack 104050 104060 3000mAh Lithium Ion Batteries

Lithium Polymer Battery Pack 3.7V 104050 104060 3000mAh Lithium-ion Batteries

Production steps:

1. Cathode Preparation

• Material Selection: The cathode material is typically a lithium - containing compound such as lithium cobalt oxide (LiCoO₂), lithium manganese oxide (LiMn₂O₄), or lithium iron phosphate (LiFePO₄). These materials are chosen based on the desired battery performance characteristics such as energy density, power output, and safety.

• Mixing: The cathode active material is mixed with conductive agents (like carbon black) and a binder (such as polyvinylidene fluoride - PVDF) in a solvent to form a slurry. The conductive agent helps to improve the electrical conductivity of the cathode, while the binder holds the active material particles together.

• Coating: The slurry is then coated onto a thin metal foil, usually aluminum. The coating process is carefully controlled to achieve a uniform thickness, which is crucial for consistent battery performance. After coating, the electrode is dried to remove the solvent and then calendared to adjust the density and porosity of the cathode layer.

2. Anode Preparation

• Material Selection: The anode is commonly made of graphite. Graphite can reversibly intercalate lithium ions during the charge - discharge cycle.

• Mixing and Coating: Similar to the cathode, the anode material is mixed with a binder and a conductive additive to form a slurry. This slurry is then coated onto a copper foil substrate. The coating is dried and calendared to form the anode electrode with the desired thickness and properties.

3. Electrolyte Preparation

• Composition: The electrolyte is a key component that enables the transport of lithium ions between the cathode and the anode. It is typically a lithium - salt - based solution dissolved in an organic solvent. Commonly used lithium salts include lithium hexafluorophosphate (LiPF₆), and the solvents can be a mixture of ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate (EMC).

• Mixing and Purification: The electrolyte components are carefully mixed in a controlled environment to ensure homogeneity and purity. Any impurities in the electrolyte can affect the battery's performance and safety. The electrolyte is usually filtered to remove particulate matter and moisture - trapping agents are used to reduce the water content.

4. Assembly

• Separator Insertion: A separator is placed between the cathode and the anode. The separator is a microporous polymer film that physically separates the two electrodes while allowing lithium ions to pass through. It prevents direct contact between the cathode and the anode, which could lead to a short - circuit.

• Stacking or Winding: The cathode - separator - anode structure can be either stacked or wound to form the cell core. In the stacking process, multiple layers of the cathode - separator - anode are piled up. In the winding process, the layers are wound into a cylindrical or prismatic shape, depending on the battery design.

• Cell Encapsulation: The cell core is then encapsulated in a flexible polymer pouch. The pouch is usually made of a laminated material that provides a barrier against moisture and air while allowing the battery to have a flexible shape. The edges of the pouch are sealed using heat - sealing or other sealing methods to enclose the cell and electrolyte.

5. Formation and Initial Charging

• Formation: After assembly, the battery cell undergoes a formation process. This involves the first few charge - discharge cycles, usually at a low current and under controlled conditions. The formation process helps to activate the electrode materials and form a stable solid - electrolyte - interface (SEI) layer on the anode. The SEI layer is crucial for the long - term performance and safety of the battery as it regulates the lithium - ion transport and protects the anode from further reactions.

• Initial Conditioning: The battery is charged and discharged several times during the formation process to optimize the electrochemical performance of the cell. The charging and discharging parameters such as voltage, current, and cycle time are carefully controlled according to the battery's specifications and the nature of the electrode materials.

6. Quality Testing and Inspection

• Electrical Testing: The battery cells are tested for their electrical properties such as capacity, internal resistance, and voltage characteristics. Capacity testing involves fully charging the cell and then discharging it at a specified rate to measure the amount of energy it can store and deliver. Internal resistance is measured to assess the cell's ability to conduct current and its efficiency.

• Safety Testing: Safety - related tests are also carried out. These include overcharge tests to check if the cell's protection mechanisms can prevent overcharging and subsequent damage or safety hazards. Over - discharge tests, short - circuit tests, and thermal stability tests are also performed to ensure the cell's safety under abnormal conditions.

• Visual and Dimensional Inspection: The cells are visually inspected for any physical defects such as cracks, leaks, or improper encapsulation. Dimensional checks are made to ensure that the cell's size and shape meet the required specifications.

Pictures: